Constructing pi64

Design objectives:

• a functional cycle-appropriate implementation of a C64/C128 with ethernet access on a Raspberry Pi Zero
• Minimal GUI using SDL1 as the base

Concerns

• the C64 or C128 will not perform near 100% of their original speed

1. Use retropi as a base install
2. Configure booting to self-login CLI

apt update
apt full-upgrade -y
Begin installing base packages to compile vice-3.2.tar.gz
apt install bison flex xa65 libpcap* libsdl1.2*
./configure --enable-sdlui --enable-ethernet
make
sudo make install
sudo apt install tcpser
sudo reboot


Issues
Works fine, unless you add sound. Then the max execution speed goes from 300% to 30% in both x64 and x128.

I couldn't get tcpser to connect to x64